Sizing Guide

Precision & Proportion


At SpiBoy Atelier, standard sizing does not exist. Every garment is individually drafted and cut to your exact anatomical profile, ensuring weightless support and a zero-bulk silhouette under bespoke tailoring.


The Measurement Protocol

Your commission begins with our digital Measurement Form. Designed for clarity and precision, this step-by-step intake captures the exact contours of your frame—from waist and hip to full body and sweep—translating your physical proportions into a master pattern.


Virtual Consultation & Fitting

To ensure absolute accuracy before the first cut is made, clients have direct access to our Virtual Fitting Room and Digital Size Consultant. Whether you require live guidance while taking your measurements or an assessment of your silhouette preferences, our specialists calibrate your numbers to eliminate guesswork.


The Member Vault

Once your measurements are verified, they are archived inside your private Member Vault.

• Effortless Commissions: Future acquisitions are drafted directly from your saved silhouette profile—no re-measuring required.

• Silhouette Evolution: Update your dimensions anytime as your physique changes, keeping your master pattern current.

• Tailored Continuity: Whether commissioning a laser-cut micro-thong or a tailored dressing gown, your fit remains consistent across every piece.


Client Concierge

Questions regarding measurement capture, fabric tension, or fit adjustments are handled directly by our Atelier Concierge. Reach out prior to finalizing your commission for private, one-on-one assistance.

 


 

SIZING & ANATOMICAL CALIBRATION

 

Precision & Proportion

At SpiBoy Atelier, standard off-the-rack sizing does not exist. Every garment is individually drafted and cut to your exact anatomical profile, ensuring weightless support and a zero-bulk silhouette under bespoke tailoring.

 

How Your Silhouette Is Built

  • The Measurement Form: Your commission begins with our digital intake form, translating your physical proportions into a custom master pattern.
  • Virtual Fitting Room & Size Consultant: For live guidance while measuring or assistance calibrating your numbers, consult our Digital Size Consultant or enter the Virtual Fitting Room prior to submitting your order.
  • The Member Vault: Once verified, your profile is archived inside your private Member Vault—allowing future acquisitions to be commissioned effortlessly without re-measuring, while letting you update dimensions anytime your physique evolves.

 

ANATOMICAL CALIBRATION PROTOCOL

Stand in a natural, relaxed upright position in front of a mirror and record all measurements in inches (or centimeters) using a flexible tailor’s tape.

 

1. SUPERIOR AXIS (Upper Body & Sleeves)

  • Neck: Measure around the base of the neck, just below the Adam’s apple. Keep one finger between the tape and your skin for natural ease.
  • Shoulder Width (Across Back): Measure straight across the upper back from the outer sharp edge of one shoulder bone to the outer edge of the other.
  • Neck to Shoulder: Start at the base of the neck and follow the top ridge of your shoulder out to the outer edge of your shoulder bone.
  • Armscye (Armhole): Loop the tape vertically around your shoulder joint, passing directly through the center of the armpit and over the top of the shoulder.
  • Chest: Wrap the tape under your arms and around the fullest part of your chest. Keep the tape level with the floor and your shoulder blades relaxed.
  • Bicep: Flex your arm at a 90-degree angle and measure around the widest peak of the muscle.
  • Forearm: With your arm relaxed at your side, measure around the widest part of your forearm just below the elbow.
  • Wrist: Measure around the narrowest part of your wrist, directly over the wrist bone.
  • Arm Length: Place the tape at the outer edge of your shoulder bone, run it down the outside of your arm over a slightly bent elbow, and end at your wrist bone.

 

2. CENTRAL ARCHITECTURE (Torso & Rise)

  • Natural Waist: Measure around your torso at its narrowest point (typically one inch above your navel). Breathe out naturally without pulling in your stomach.
  • Low Waist (Garment Band): Measure around the lower torso directly across the top of your hip bones where low-rise briefs, thongs, and trousers naturally sit.
  • Hip / Seat: Wrap the tape around the fullest part of your seat, ensuring the tape remains perfectly parallel to the floor.
  • Back Length: Start at the prominent bone at the very base of your neck and measure straight down your spine to your natural waistline.
  • Front Length: Start at the hollow of your throat (base of the neck) and measure straight down the center of your chest to your natural waistline.
  • Total Rise: Place the tape at the center-front of your natural waistline, run it down between your legs, and pull it up to the center-back of your waistline.
  • Torso Loop: Start at the midpoint of your shoulder, run the tape straight down your front, through the crotch, and back up your spine to the exact same shoulder point.

 

3. INFERIOR AXIS (Lower Body & Leg)

  • Inseam: Start at the highest point of your inner thigh and measure straight down the inside of your leg to the center of your ankle bone.
  • Outseam: Start at your natural waistline on the side of your body and measure straight down the outside of your leg to your ankle bone.
  • Thigh Girth: Measure around the widest part of your upper thigh, approximately two inches below the crotch.
  • Knee Girth: With your leg straight and relaxed, measure around the center of your knee joint.
  • Calf Girth: Stand with your weight distributed evenly on both feet and measure around the thickest, most muscular part of your calf, keeping the tape level with the floor.
  • Ankle Girth: Measure around the narrowest part of your ankle, just above the ankle bone.

 

4. ANATOMICAL CONTOUR (Pouch & Sheath Calibration)

  • Base Perimeter: In a relaxed, neutral state, gently loop the tape around the base perimeter to establish zero-constriction support.
  • Projection / Length: Measure from the base along the natural contour to determine sheath depth or pouch volume calibration.
  • Profile Preference: Indicate your preferred structural tension inside your Measurement Form (Contoured / Architectural Support vs. Relaxed / Second-Skin Ease).

 

ATELIER CALIBRATION NOTES

  • Static Tension: The tape should rest flat against your skin like a second layer—never pull it tight enough to compress or indent the flesh.
  • Mirror Verification: Use a full-length mirror to confirm the tape remains level and untwisted across your back and seat.
  • Concierge Review: Unsure about a reading? Contact concierge@spiboy.com or launch the Digital Size Consultant before finalizing your commission.